By making the OS part read-only, writing to storage is greatly reduced, extending the life of the storage media. In addition, it increases the probability of preventing damage to the OS part in the event of a sudden power failure.
Partitions on external media can be modified while the system is running.However, the partition that the OS is currently running from cannot be modified directly.You must access it from another system. Here, the OS is written in Raspberry Pi Imager for use with Raspberry Pi devices such as Raspberry Pi 5 and CM5.The same partitioning procedure can be used for the Raspberry Pi OS as well as Ubuntu Desktop. Split into partitions Instead of partitioning from scratch, write the OS as usual with the Raspberry Pi Imager.Another partition is created after startup. Raspberry Pi OS Write Activate the written microSD card or other device as usual.Once activated on the Raspberry…
The PiShrink tool software allows you to reduce the size of the Raspberry Pi OS image file that you have backed up in its entirety beforehand. The reason why it is necessary to reduce the size of the image file is because the file size will inevitably become huge, making it difficult to save and handle. The backup image file for the Raspberry Pi Compute Module 4 that we have prepared is about 30 GB. Multiple backup files require even more storage space. Even if the files are stored in a different location, it will take a considerable amount of time to move or copy the files. If the file…
When we hear the words AI image processing and edge processing, we tend to imagine a large system, but in fact, Raspberry Pi is used in systems that are practical enough.
