PL-R5 BASIC RJ Plus IP20

Industrieller Raspberry Pi 5 (CM5)
Breiter Stromversorgungseingang DC9V bis 40V
Breiter Temperaturbereich und hohe Störfestigkeit
Vibrationsbeständige, äußerst zuverlässige M5- und iX-Anschlüsse
Robustes Aluminiumdruckgussgehäuse
2 GLAN-Ports und SPE (Single Pair Ethernet)
USB 3.0 Typ A und USB 3.0 für internen Bus
Onboard-eMMC, keine SD-Speicherkarte für den Startvorgang erforderlich
microSD-Steckplatz für Datenspeicherung
Interner M.2-Steckplatz für SSD- und WWAN-Erweiterung
Raspi40p-Anschluss für Erweiterungskarten
Batteriegepufferte Echtzeituhr (RTC)
Zuverlässiger Hardware-Watchdog
Kompatibel mit Wandmontage und DIN-Schienenmontage
Übersetzt mit DeepL.com (kostenlose Version)
Item Details
Processor Broadcom BCM2712, Quad core-A76 @ 2.4GHz
Memory RAM8GB, eMMC64GB (Depend on model)
OS Raspberry Pi OS
I/F Front 1x PWR: Power input, 2-line
2x LAN: GLAN[1000Mbps]x2ch
1x SPE : 10BASE-T1S x1ch
1x OPT: i2c/RS-232/485 selectable
1x USB: USB3.0 Host Type-A
1x IO: – 2ch Di (photocoupler input, 5V-24V DC)
– 2ch Do (photorelay output, 48V DC)
Max. 400mA at 25°C / Max. 250mA at 60°C
– 4ch Ai (no-isolated,16bit resolution,max.860SPS)
Selectable 0-5V or 0-10V (100V)
1x Maintenance: Maintenance Display port(Reserved)
1x WLAN IEEE 802.11 b/g/n/ac, Bluetooth 5.0, BLE [Option]
1x LTE (M.2 slot/EM7431)
I/F Back 1x USB-C: USB Type-C(eMMC writing only)
1x SW: eMMC write switch
1x microSD: microSD slot
1x nanoSIM slot
I/F Internal 1x M.2 slot B-key*
1x CSI, 1x GPIO 40pin, 1xFAN, 1x BAT, 1x SW
RTC/NVRAM BR1225[or CR1225] Backup RTC
Watchdog Built-in hardware watchdog
Power/Consumption Power supply rated DC12/24V, range DC9V to 40V/approx. 15W (including USB)
Temperature Operating Temp.: -20…+60 °C, Storage: -25…+85 °C
Humidity Operating Humi.: 0~95% (non-condensing)
Waterproof grade IP20
Housing material Aluminum powder coating
Dimensions W132xD87xH35mm (excluding protrusions)
Weight Approx. 530g
Vibration/shock IEC 60068-2-6 / IEC 60068-2-27
EMI Radiated emissions EN55016-2-3
EMS Electrostatic radiation immunity EN 61000-4-2
Radio frequency electromagnetic fields EN 61000-4-3
Fast transient burst EN 61000-4-4
Installation method DIN rail mounting, wall mounting [Option]
Note * Not a full pin connection. USB3.0, PCIe, and SIM are connected.

Fehler: Kontaktformular wurde nicht gefunden.

Demo Video 1

Video Thumbnail
Play Icon