PL-R5M DIO IP20

Industrial Raspberry Pi (CM5)
Digital In/Out、COM、CAN
Raspberry Pi OS compatible (Ubuntu requres 4GB or more RAM)
DC12/24V power input
Wide operating temperature range and high noise resistance
M8, M5 and ix connectors with high vibration resistance and connection reliability
Robust aluminum die-cast housing
Supports wall mount and DIN rail mount
On-board eMMC (SD card is not used for boot)
microSD slot for data storage
M.2 slot inside SSD and WWAN expansion
Raspi40p connector for expansion board

Product Specification
Processor	Broadcom BCM2712, Quad core-A76 @ 2.4GHz
Memory	RAM8GB, eMMC64GB (can be changed by model designation)
OS	Raspberry Pi OS
I/F Front	1x PWR : Power input, 2-line 2x LAN : FLAN[100Mbs]x1, GLAN[1000Mbs]x1 1x OPT*1 : i2c/RS-232/485 selectable 1x USB : USB2.0 Host Type-A 1x CN1 : – Di16ch[14ch] (PNP)/2.4mA at 24VDC – Do8ch(PNP)/Pushpull0.1A,High-side0.5A – COM 1ch RS-232/RS485(2w) – CAN 1 or 2ch/CAN 2.0B,CAN FD 1Mbps 1x Maintenance: Display connection [Option] 1x WLAN IEEE 802.11 b/g/n/ac, Bluetooth 5.0, BLE [Option] 1x LTE(M.2 slot/EM7431)
I/F Back	1x USB-C: USB Type-C(eMMC writing only) 1x SW: eMMC write switch 1x microSD: microSD slot 1x nanoSIM slot
I/F Internal	1x M.2 slot B-key*2 1x CSI, 1xGPIO 40pin
RTC/NVRAM	BR1225[or CR1225] Backup RTC
Power/Consumption	DC10.7V～28.8V/13.5W (incl.USB 500mAx1)
Temperature	Operating Temp.: -20…+60 °C, Storage:-25…+85 °C
Humidity	Operating Humi.:0～95%(non-condensing)
Waterproof grade	IP20
Housing material	Aluminum powder coating
Dimensions	W132xD87xH35mm (excluding protrusions)
Weight	Approx.570g
Vibration/Shock	IEC 60068-2-6 / IEC 60068-2-27
EMI	Radiated emissions EN55016-2-3
EMS	Electrostatic radiation immunity EN 61000-4-2 Radio frequency electromagnetic fields EN 61000-4-3 Fast transient burst EN 61000-4-4
Installation method	DIN rail mounting, wall mounting [Option]
Note	1 The speed is variable, but data bits 8, parity N, and stop bits 1 are fixed. 2 Not a full pin connection. USB2.0, PCIe, and SIM are connected.