Accelerometer sPL-ACC

Analog voltage output 0-10kHz 1-axis accelerometer

High-performance MEMS sensor measures vibration of motors and other devices with high accuracy.
The latest MEMS chip realizes a measurement range of over 20,000 Hz and overwhelmingly low noise.
Ideal for diagnosing motor failure
Built-in temperature sensor (I2C) and low-speed 3-axis accelerometer (I2C)
Dustproof and waterproof IP66
Industrial Raspberry Pi PL-R4/R5M/R5 SENSOR
Or connected to the wireless sensor box rPL-vibration

Application Overview

 

Product Specifications Details
Model No. sPL-ACC [P/N: SPLACCR01z].
probe Mounting: M6 screw
Operating temperature range: -20 to 85°C
IP class: IP66
Material: Rigid anodized aluminum
Dimensions: φ 21.3 x 33.4 mm (excluding protrusion and cable)
Attached cable Length: 2m
Connector: M8 8pin male
Built-in sensor ①
1-axis acceleration sensor
(analog voltage output)
Acceleration range: -10g to +10g
Frequency range: 0 to 10kHz (±10%)
Noise level: 25 μ g/√ Hz
Nominal sensitivity: 40mV/g
Sensitivity variation with temperature: ±2%
Linearity error: 0.1%FS
Cross axis sensitivity: -1 to +1%
Supply voltage: 5V
Built-in sensor②
Temperature sensor (I2C output)
Temperature sensor range: -40 to 125°C
Temperature sensor accuracy: ± 3°C (-40 to 85°C)
Resolution: 10bits
Supply voltage: 3.3V
Built-in sensor ③
Low-speed 3-axis accelerometer
(I2C output)
Acceleration range: 2 to 16g
Sample rate: 1Hz
Resolution: 10bits
0g offset error: -250 to 250mg
0g offset temperature coefficient: ± 1.2mg/°C
Linearity error: ± 0.5%FS
Cross axis sensitivity: -1 to +1%
Supply voltage: 3.3V